GEOSYN RIFFLER ( SAMPLE DIVIDER ) |
|
Efficient sampling out of bulk materials/deposits is the most
important for getting the true idea about the bulk material.The
volume of material to be tested is usually quite huge and it
requires reduction in volume in a methodical manner.
The GEOSYN Riffler Sampler(sample divider) helps to reduce the
bulk while maintaining the character of the material and thus it is
a helpful ,light and handy device for sampling work.
The standard units are made of GI sheet and mounted on rigid steel
frame and supplied with three pans and one scoop.
Standard Chute sizes are 25mm, 18mm and 12 mm.
However, the Chute sizes can be made according to the user's
specifications etc.
. |
|
GEOSYN SIEVE SHAKER MOTORISED |
|
GEOSYN Sieve Shaking Machine is ideally suited for carrying out sieve analysis of different materials in dry conditions.
The body of Sieve Shaking Machine is made of cast iron and the base is made of m.s.sheet.Top rotating plate is made of cast aluminium complete with arrangement for fixing 8"/20cm. or 30cm.dia. sieves with lid and receiver.
Features :
:: ¼ h.p. Motor CROMPTON for 220/230V A.C. supply.
:: Timer 0-60minutes is provided in the circuit.
:: Rotation of sieve stage 12 per minute.
:: Simultaneous tapping 500per minute.
:: Oil bath for machine parts.
:: Oil level indicator. |
FOR 45CM. DIA. OR SQR. SIEVES |
The body and the base of Sieve Shaking Machine is made of mild steel plate and the top rotating plate is made of mild steel / aluminium plate with arrangement for fixing 5nos. of 45cm dia. or square sieves, with rigid clamp.
Features :
:: 1 H.P. motor for 220/230V A.C. supply.
:: Timer 0-60mts. is provided in the circuit
:: Rotation of Sieve stage is 10 per minute.
:: Simultaneous tappings 400 per minute.
:: Oil bath for machine parts.
:: Oil level indicator.
Dimensions :
:: M.S. box: 400mm L x 385mm W approx.
:: Ht. from base to rotating base: 525mm approx.
:: Ht. from base to top of Sieve Clamp: 1425mm approx.
:: Length of base plate with complete assembly & motor: 925mm approx.
Gross Wt :
:: 80kg. approx. |
GEOSYN TEST SIEVE (WIRE MESH)) |
|
GEOSYN TEST SIEVE: Wire mesh test sieves are available in joint less brass or stainless steel frames in 100mm, 200mm or
300mm diameter. Wire meshes used are mostly of stainless steel. However stainless steel perforated plates or Spring steel wire meshes are also used as per the customer's choice. All sieves are manufactured in strict conformation of the respective standards
laid down as per BIS, BS, ASTM and Tyler Specifications.
GEOSYN Test Sieves cover a very wide range which suits the requirements of the various industries for the grading and analysis
of the materials. |
GEOSYN TEST SIEVE (PERFORATED PLATE) |
|
GEOSYN TEST SIEVE: Perforated Plates are available in heavy gauge g.i or s.s.. round frame usually in 300mm or 450mm
diameter, as per BIS Specification IS: 460.
The perforated plates are made of mild steel or s.s. gauges as specified in the standards, and with square openings.
However round opening perforated plates and frame dimensions as per the Customers specifications are also manufactured.
Click here for detailed specifications
|
